Small Mach3 Problem

[Clive S]

I noticed that you did not mention soft limits, do you have them set up as that alone would have not allowed you to hit a limit switch

[needleworks]

I noticed that you did not mention soft limits, do you have them set up as that alone would have not allowed you to hit a limit switch

I have never physically set them up Clive, at least not that I know of ! is there a way to disable them if they are set up ?

[Clive S]

I have never physically set them up Clive, at least not that I know of ! is there a way to disable them if they are set up ?

Have you seen this https://www.google.com/search?q=sett...HA8gKHrZiAAQ23

[needleworks]

Have you seen this https://www.google.com/search?q=sett...HA8gKHrZiAAQ23

Yes Clive, I had looked at that but couldn't find anything that told me if they were active, and if so how to disable soft limits. To be honest I have never even been in that section of Mach3.

[JAZZCNC]

Just because the switches work as homes doesn't mean they are set to work as limits. To work and share limits with the home switch then you will need to enable and set the limits to the same pin numbers as home switches.

If they are all ready enabled and set then would need to see the XML file.

[needleworks]

Just because the switches work as homes doesn't mean they are set to work as limits. To work and share limits with the home switch then you will need to enable and set the limits to the same pin numbers as home switches.

If they are all ready enabled and set then would need to see the XML file.

The thing that puzzles me Dean is that it has worked flawlessly for years, and still continues to work perfectly with UCCNC. I have tried to include a copy of my xml file but it says "invalid document" can I just copy it as text and paste it in here?

[Clive S]

The thing that puzzles me Dean is that it has worked flawlessly for years, and still continues to work perfectly with UCCNC. I have tried to include a copy of my xml file but it says "invalid document" can I just copy it as text and paste it in here?

Just add .txt to the end of the file name

[needleworks]

Just add .txt to the end of the file name

Ahhhh, thanks mate.

X Box.txt