CNC Newbie

[hanermo2]

Jazz is pretty well known and well regarded ..
Whatever You buy from him will work and be a very good compromise for 10x less money than the big names in the field.
Imho.
I´m not his friend or whatever.
And 95% of his advice I agree with, with 20% of style being less than optimal.

A 10x5 "light-industrial" machine with full auto toolchanger, that I think is absolutely mandatory, will run around 15-20k.
I think.
Toolchanger and "industrial" add about 5k to the ticket.
But they also make the output about 3x, often above 500 - 1000 - 2000 € per day in cuts in production.


The Haas GRS used to cost about 70k€ and up.

One can get a light-semi-cnc without a toolchanger and sensors and probing and io and robust controller for about 5-7k.
From jazz.
For lots of jobs and use it can be an excellent option.