Complete 3 axis and spindle motor CNC system.

**Chaz** · 25-01-2021

What model number is the controller? Willing to split any of the system?

**molliemilo1** · 25-01-2021

Originally Posted by Chaz

What model number is the controller? Willing to split any of the system?

ADT-CNC4640 is the controller (£790 + VAT to buy new).
FCNC4M Additional panel.
CNC4A MPG.

Would split if had a decent enough offer but, am only asking £1000 for the whole bundle.

**Chaz** · 26-01-2021

Originally Posted by molliemilo1

ADT-CNC4640 is the controller (£790 + VAT to buy new).
FCNC4M Additional panel.
CNC4A MPG.

Would split if had a decent enough offer but, am only asking £1000 for the whole bundle.

Understood, not a bad price. Problem is, I dont need all of it. I'm primarily after the spindle motor / setup to see if I can upgrade my Bridgeport with, the other stuff Ill make use of as needed - the control might be interesting but just invested in SGHZ stuff for my lathe (similar setup) but would remain with them most likely for my next upgrade / retrofit.

Let me think about it.

Thanks

**molliemilo1** · 26-01-2021

Will put on Ebay.The 2.2kw spindle motor is mounted on a motor plate that fits a Bridgeport BR2J head with a motor driven 10M pulley of 72 teeth driving a spindle pulley of 36 10m teeth,which gives a 2:1 ratio.Motor running at 60hz will give 3600rpm at spindle (approx.).