My UCCNC Probe Screen version 4 is available now

[A_Camera]

Thank you Jazz. My phone buzzed just a minute before I went to bed last night... I appreciate your contribution and comments above.

[dazp1976]

Thank you Jazz. My phone buzzed just a minute before I went to bed last night... I appreciate your contribution and comments above.

All we need now is an ATC screen with image of a carousel, L, R + spin buttons, draw clamp I/O, and anything else that's needed or can be thought of.

[JAZZCNC]

All we need now is an ATC screen with image of a carousel, L, R + spin buttons, draw clamp I/O, and anything else that's needed or can be thought of.

Why do you need that.? The amount of work involved is massive and the reality is when using the machine that none of this is seen or needed.
The tool offset screen tells you everything you need to know about the tool and on the main screen, all you need to see is the current tool number, tool offset, diameter offset, Next tool, and if using a carousel type the pocket that is lined up with the spindle.

[A_Camera]

All we need now is an ATC screen with image of a carousel, L, R + spin buttons, draw clamp I/O, and anything else that's needed or can be thought of.

Good luck, it's your turn to do it. I will never have an ATC on my machine since I have no need for it, nor is my machine big enough for that. If I ever change or add anything, it will be for my DIY lathe, but currently no real plans for that.