Quote Originally Posted by Jonathan View Post
The torsional stiffness of I section is very poor compared to RHS or box section and clearly the ganty twisting directly leads to tool deflection (proportional to the extension of the Z-axis) parallel to the Y-axis.
There you go again Jonathan completely missing the point.!! . . . . YES AGREE there are stronger and lighter ways to build a Gantry BUT and here's the point.!! THIS WILL EASILY HANDLE THE JOB OF CUTTING WOOD AND BE MORE THAN STRONG ENOUGH . . very easy to build and cheap easy to source.

From what I under stand Dean intends mainly wood use so the Z extension will be minimal, or should be for best results, so given that it's only 1500mm long and twin screw driven being securely tied into both the X axis bearing plates and the gantry end plates and with a good steel thickness on RSJ then the twisting(torsion) will be minimal.

Not every body has the skills or equipment you and I have so minimising the equipment required but still having a strong gantry doesn't get any easier than this.! . . .Drill and saw/grinder are the only tools required.