George's 8x4 router-me-bob

[C.AlveSilva]

...I'm going to be making a couple of rotating ballnut mounts soon, so let me know if you're interested and I'll work out the price as it'll be more efficient to make several at the same time. I've updated the design to be fully enclosed with aluminium such that no swarf can get in. Something like this, can of course modify it to suit / aid mounting:

Hello,

I'm probably interested ... I am considering using this system instead of the traditional.
In my project I'm planning to use 2005 Ballscrews with Nema 23, (3.1 or 4 Nm).
Already know something about the cost?

[Jonathan]

I'm probably interested ... I am considering using this system instead of the traditional.
In my project I'm planning to use 2005 Ballscrews with Nema 23, (3.1 or 4 Nm).

If the machine is big enough to consider rotating ballnuts you do not want to use less than 10mm pitch screws.
I can make some more, however I'm currently busy making another machine and other parts so it's a matter of how soon you need them?