ohms in chinese spindle

**irving2008** · 08-07-2012

AC at 400Hz or so... you must make sure your Inverter settings are right. If the startup frequency is too low for example it will overheat the motor windings but the motor won't turn. It is unusual to fry the Inverter, normally they are well protected. Have a read of this thread it might help.

**edgas10** · 08-07-2012

Originally Posted by irving2008

AC at 400Hz or so... you must make sure your Inverter settings are right. If the startup frequency is too low for example it will overheat the motor windings but the motor won't turn. It is unusual to fry the Inverter, normally they are well protected. Have a read of this thread it might help.

hi there, did you checked the resistance value??