Strike CNC (My first CNC router)

[Shinobiwan]

Sigh why are things never as simple as they should be.

Had it up and running with mach doing some jogging about and it jerks around like a jack hammer on the Y and Z stalls all the time even with low speed/accel. The software from Leadshine doesn't work for me either and throws up errors then crashes when reading or writing data to the drives.

Why didn't I spend the money on a nice long holiday instead!

[Gary]

What errors are you getting?
the software works very well, and will alow you to get very smooth motion and reduce resonance to a minimum.
what RS232 cable are you using? and are you going from native RS232 or through a dongle?
You may be better to just do the Auto tune till you get it running right, then do the mach 3 motor tuning (set accel / de accel up) and so on.
after this if you want to tune more, then use the software, but in most cases it is not needed.

Sigh why are things never as simple as they should be.

Had it up and running with mach doing some jogging about and it jerks around like a jack hammer on the Y and Z stalls all the time even with low speed/accel. The software from Leadshine doesn't work for me either and throws up errors then crashes when reading or writing data to the drives.

Why didn't I spend the money on a nice long holiday instead!

[petesos]

Sigh why are things never as simple as they should be.

Had it up and running with mach doing some jogging about and it jerks around like a jack hammer on the Y and Z stalls all the time even with low speed/accel. The software from Leadshine doesn't work for me either and throws up errors then crashes when reading or writing data to the drives.

Why didn't I spend the money on a nice long holiday instead!

Well Bud I am nearly smashed out of my face drinking Jack Daniels and on my third box of kleenex reading all the posts regarding StrikeCNC and I asked myself that very question....why didnt I spend the money on a nice holiday .
Still look on the bright side at least you have your machine All I have is a few texts and they cost me over £5000
Pete

[JAZZCNC]

Still look on the bright side at least you have your machine All I have is a few texts and they cost me over £5000
Pete

Yes but he still doesn't have a working machine and the very short time it did work then it was completely useless. . . SO My very strong advice having dealt with Ant's machine is to get your money back "DONT TAKE DELIVERY". it can only get worse.!

It's your statutory rights to change your mind and ask for the money back and because they have taken so long with delivery then I suspect they have broken the agreement so will have to return any deposit. I'm no expert so check it out but think they won't a have a leg to stand upon.? ( He certainly wouldn't have working one if it was my money.!!)

This base machine(Not with enclosure) can easily be built for around 2K by anyone with half decent skills. Like I said at the beginning this machine can be made with just a decent drill press and basic hand tools. Yes it could be made far better with milling machine or another cnc machine and is were I'm helping Ant but the actual machine your buying can easily be made with drill press and hand tools.!

[petesos]

Yes but he still doesn't have a working machine and the very short time it did work then it was completely useless. . . SO My very strong advice having dealt with Ant's machine is to get your money back "DONT TAKE DELIVERY". it can only get worse.!

It's your statutory rights to change your mind and ask for the money back and because they have taken so long with delivery then I suspect they have broken the agreement so will have to return any deposit. I'm no expert so check it out but think they won't a have a leg to stand upon.? ( He certainly wouldn't have working one if it was my money.!!)

This base machine(Not with enclosure) can easily be built for around 2K by anyone with half decent skills. Like I said at the beginning this machine can be made with just a decent drill press and basic hand tools. Yes it could be made far better with milling machine or another cnc machine and is were I'm helping Ant but the actual machine your buying can easily be made with drill press and hand tools.!

Hi Bud
I have given this cretin enough time and now I am just waiting for the 7 day warning letter period to expire and then its off to court with this parasite, I need people to come forward and let me know if they want there cases brought up at court as I think there is a case for HSE here to be informed Does that man not understand he could have killed someone with that shody wiring I read about in one of the Posts on this forum.
But like I said I am taking him to court when the warning letter expires (Tuesday) If anyone wants there day with this Parasite let me know
Petesos

[JAZZCNC]

as I think there is a case for HSE here to be informed Does that man not understand he could have killed someone with that shody wiring I read about in one of the Posts on this forum.

It was mains live so Certainly wouldn't have just tickled that's for sure.!!

Hope things workout ok.!

[wkt]

Hi Bud
I have given this cretin enough time and now I am just waiting for the 7 day warning letter period to expire and then its off to court with this parasite, I need people to come forward and let me know if they want there cases brought up at court as I think there is a case for HSE here to be informed Does that man not understand he could have killed someone with that shody wiring I read about in one of the Posts on this forum.
But like I said I am taking him to court when the warning letter expires (Tuesday) If anyone wants there day with this Parasite let me know
Petesos

Hello Petesos,

Here another strike customer. I want to send you a pm but i can't figure out how to do this. Can you contact me?

[Shinobiwan]

Oh dear...

I'm in contact with 5 people not including myself who have had a bad experience with Strike CNC. Pete in particular I feel bad for as he paid his money and hasn't seen anything since.

[wkt]

Oh dear...

I'm in contact with 5 people not including myself who have had a bad experience with Strike CNC. Pete in particular I feel bad for as he paid his money and hasn't seen anything since.

My story is the same, i paid 4 months ago for the machine but i'm still waiting.