Denford Triac PC for sale

[i2i]

Hi, here's a link to the denford website.
Denford Software & Machines • View forum - Triac
This machine has 300mm x axis, 180mm y axis, 235mm z axis. 1.5hp dc spindle 4000rpm.
It's a 1995 model i think, but don't let the age fool you, it has come from a school that barely used it. The condition is excellent and the quality is far better than the seig range of machines. This machine was £20,000 new, is extremely rigid and has no visible wear on any slide or ballscrew.
If you want a chat about it give me a ring on 07791011037 anytime.

[Tommy]

Hi, here's a link to the denford website.
Denford Software & Machines • View forum - Triac
This machine has 300mm x axis, 180mm y axis, 235mm z axis. 1.5hp dc spindle 4000rpm.
It's a 1995 model i think, but don't let the age fool you, it has come from a school that barely used it. The condition is excellent and the quality is far better than the seig range of machines. This machine was £20,000 new, is extremely rigid and has no visible wear on any slide or ballscrew.
If you want a chat about it give me a ring on 07791011037 anytime.

Hi, Do you have “baldor D281 motion control card for a triac P. C. (denford), red 7-segment LED display type. The firmware is ESMINT 3.28 V1.6H/S - JD5.”