Mains, PSUs and other goodies.

[i2i]

if there's a spare spur in the main fusebox fit a 32A/40A breaker and run a new length of 4mm or 6mm cable up to your work area and put a breaker there. Run the machine from that.

[Rogue]

if there's a spare spur in the main fusebox fit a 32A/40A breaker and run a new length of 4mm or 6mm cable up to your work area and put a breaker there. Run the machine from that.

Which would be sensible I suppose, though once you get into fiddling with the fusebox you need proper electricians and paperwork to prove it's done properly?

[JAZZCNC]

Which would be sensible I suppose, though once you get into fiddling with the fusebox you need proper electricians and paperwork to prove it's done properly?

Don't know what you mean officer it's been like that since I did it.! . . .Err . . mean we moved in.!!. . . . . Actually I think the Regs have got so silly you can't even change a socket now without the HSE police knocking.?

Seriously thou it would be worth the expense for peace of mind and allow you to use what ever you like without torching the place or getting eaten by trolls.!!

[Rogue]

Seriously thou it would be worth the expense for peace of mind and allow you to use what ever you like without torching the place or getting eaten by trolls.!!

I quite agree. I'm perfectly happy with having the old CU replaced and some wiring run up for proper power. It's just starting to double the budget. I was looking forward to ordering the first batch of bits on my birthday next week This might require some thinking.