. .

Thread: Mach3

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 23-10-2012 #1
    Jonathan's Avatar
    Lives in Leicester (Home) or Nottingham University (2nd Home), United Kingdom.
    Jonathan
    Last Activity: 05-04-2020 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 3,571. Received thanks 325 times, giving thanks to others 8 times. Referred 1 members to the community.
    If you go on the 'Tool Path' tab (Alt-4) you can see extent of the tool-path under program limits.

    You should be able to just connect the probe to one of the inputs on your breakout board and Mach 3 will read it...
    Last edited by Jonathan; 23-10-2012 at 04:39 PM.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.
    Reply With Quote Reply With Quote
  2. 23-10-2012 #2
    petesos's Avatar
    Lives in Gloucestershire, United Kingdom.
    petesos
    Last Activity: 03-02-2025 Has a total post count of 199. Received thanks 4 times, giving thanks to others 19 times.
    Quote Originally Posted by Jonathan View Post
    If you go on the 'Tool Path' tab (Alt-4) you can see extent of the tool-path under program limits.

    You should be able to just connect the probe to one of the inputs on your breakout board and Mach 3 will read it...
    Hi Jonathan
    Here is a photo of it and I have looked all round it but there are no names or marks on it........any ideas ???Click image for larger version.  Name: 2012-10-23 21.24.41.jpg  Views: 455  Size: 833.7 KB  ID: 7201
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules