ArtPath software or the best equivalent?

[alex wight]

thank you lee, funny you should say speak to spandex, as thats where i used the maching, the scottish spandex. I,ll have a wee look at the ones you suggest, and see how i get on. Thanks very much, and i,ll let you know how i get on.

alex

[martin54]

thank you lee, funny you should say speak to spandex, as thats where i used the maching, the scottish spandex. I,ll have a wee look at the ones you suggest, and see how i get on. Thanks very much, and i,ll let you know how i get on.

alex

Vetric have a free download for their software so you can download & try it out yourself to see if you get on with it, they also have some tutorials which looked to be pretty good & a forum which is well supported. Worth having a look at although I don't suppose it will suit everyone.

If you have any software like Corel, Illustrator that is vector based then you can use that for design work but you then need a cam program to convert the exported files to G code for mach3 to run.