Estimate for Motorcycle Part

[blackburn mark]

No problem but just for the record I wasn't giving attitude and my first post was offering sound advise based of experience. It was you who came back with attitude.!

Maybe you need to lighten up bit.!

I'm guessing it was the "I certainly wouldn't.!" ... a tad dismissive jazz
you may well be the GOD of whatever but I guess tact is a tad more than you can muster
ccccchill out jazz its a brand new year and you have started with the size 11's already

[JAZZCNC]

I'm guessing it was the "I certainly wouldn't.!" ... a tad dismissive jazz
you may well be the GOD of whatever but I guess tact is a tad more than you can muster
ccccchill out jazz its a brand new year and you have started with the size 11's already

Was away last night so couldn't reply.

Mark we all know you don't like me and thats fine by me. . . .! But the remark you mention had no bad or dismissive meaning. It simply stated I wouldn't touch this job or give estimate or quote based on the FIRST design (which is what I originally commented on). An estimate is what the Ignorant OP wanted.

Now the really stupid part on the OP is the fact I'd have Glady helped on both design and machining the part just for the price of the material and the challenge. (Oh and if you/he doubt's this just ask the many others on the forum I've helped with machining FOC )
For the price of Ali he would have had the experience of an Honda trained engineer with over 10yrs experience working for HRC the racing and development division. I've had and tested or destroyed more custom bits thru my hands than he's had petrol thru the bike.

EDIT: And if the OP had read is PM's he'd have seen I'd offered to help before he ever showed a design.!!
So this Retard just wants to say good luck to the OP and Happy new year to every one else. .

[blackburn mark]

Mark we all know you don't like me and thats fine by me

"we all" (whoever they are) and you are under a misconception jazz, indeed there are times I see you like a lord of the rings cave troll stomping around with your size 11's and i like to on occasion offset some of what I see as heavy handedness
try not to hold that against me.

Now the really stupid part on the OP is the fact I'd have Glady helped on both design and machining the part just for the price of the material and the challenge. (Oh and if you/he doubt's this just ask the many others on the forum I've helped with machining FOC )
For the price of Ali he would have had the experience of an Honda trained engineer with over 10yrs experience working for HRC the racing and development division. I've had and tested or destroyed more custom bits thru my hands than he's had petrol thru the bike.
So this Retard just wants to say good luck to the OP and Happy new year to every one else.

iv seen you pull this card on a few occasions jazz and it puzzles me... you pull it out whenever you have carved massive chasm of discord between yourself and your adversary ? what puzzles me is why do you bother to describe how much your adversary is missing out in not having you as a buddy ?
it seems a little pointless... is it a Yorkshire thing ?

[JAZZCNC]

iv seen you pull this card on a few occasions jazz and it puzzles me... you pull it out whenever you have carved massive chasm of discord between yourself and your adversary ?

Erm first If you read again my first post then I didn't carve anything just a bit of advise given in good faith.! It's not my fault if the OP took it has attitude it was certainly not meant that way.

what puzzles me is why do you bother to describe how much your adversary is missing out in not having you as a buddy ?
it seems a little pointless... is it a Yorkshire thing ?

Second I don't see anyone has adversary and the point of my comment was to show that if the OP treat people with a bit more courtesy he could be surprised by the help he'd get back in return and in this case specificly from some one with experience of the exact sort thing he wants done and the tools to get it done.

Employing Courtesy goes along way and cost's nothing.!! Dishing out insults takes the same effort and cost's plenty. . . In this case the probably £45hr labour for an engineer.??

[Lee Roberts]

Hi guys,

I think enough has been said here now; there is all sorts being said and flying about.

I don’t see the thread will need to be continued in favour of the original request and that being a “RFQ”, if anyone would like to contact Ratch regarding this “RFQ”, please do so via the PM system.

Employing Courtesy goes along way and cost's nothing.!! Dishing out insults takes the same effort and cost's plenty.

Definitely agreed, sorry guys but in courtesy to everyone this is now locked. :(

Community & Forum Rules - PLEASE READ !

.Me