11 hours of trying to get the motors to turn, help please

[John S]

We always set to a minimum of 5us. half the boards out there are just not fast enough regardless or what they say.

sorry, never though to mention this, just do it automatically.

BTW mach says 0 - 5 us or 1 - 5us [ can't remember ] but it will accept a greater value. Sometimes have to go as high as 7 to get some of the spindle speed boards to output the full 10v.

[JAZZCNC]

sorry, never though to mention this, just do it automatically.

SNAP. . . But usually you get some motion just a bit erratic so I'm surprised at that.!! . . . I'd be suspicions of that BOB and it would have been obliterated against the wall by now anyway. .