i didnt think i was stupid but i do now!

[Fivetide]

The Eagle machines with DSP do't not require 'setting up' they work out of the box.

You load a .nc code file to a USB memory stick, then put the memory stick into the DSP handle, then load and run the program after setting your zeroes on your material.

If you need more help let me know.

Colin

Colin, high we spke before when I bought the CNC off you , just a quick question about NC, it runs fine but no matter what feed rate I set in the g-code I always have to crank it down to 10% in NCStudio or it cuts a tiny size of the original, do you have the same problem ?