Re my question

[oldwoodworker]

Interesting project - just had a bit of a play and here's a pic of a "nautilus" I knocked up in Rhino.

Hello there. Love the pics . My design is not like the er Nautilus I tried to make it like a tuba it is more elongated with a gentle even taper down to 25mm it is the first pics that I have seen in CAD. I only did sketches . If you went to hifiwigwam there is a later pic . Do you think you could do it for me in CAD to be able to get it machined out out of solid ? .It has given me a real boost to see it. My thanks again hope to hear from you soon Peter

[stirling]

Hello there. Love the pics

Thanks

If you went to hifiwigwam there is a later pic

link please.

Do you think you could do it for me in CAD

Easy there big fella one step at a time... bashing out the nautilus "freeform" model is one thing - working to a brief is another. Link to what you have and I'll take a look see.

nearly forgot...

Love the drawing. G.

Thanks G.

Ian

[oldwoodworker]

I have at last found someone to draw 2d/3d cad for me it is being drawn now . It is a relief for me . The prototype has been glassed needs the final skim & polish for the mould to made in the next week . I am so pleased over the outcome . The performance has exceeded my expectations by some margin . I will need some one to cnc router out of solid for me if anyone can help I would be most grateful . It has taken me 6 months well over 700 hours . I must be mad !! don't answer it I already know . It has taken its toll on me medically . I saw my hospital specialist he said have you had any stress lately oh no no no I said The designer said how on earth did you make it & how long . I said British grit & determination .I have tried 5 15" drivers bored 3 out to take a tweeter . would you believe that the cheapest sounds the best at the moment . Seriousley thinking of making my own up to my specs . Here i go again .

Thanks everybody for your help be in touch soon Peter

[oldwoodworker]

Hello everyone I am back . Had my long term illness come back with a vengance been in hospital for a while . I must come clean about it I have had ulcerative colitis for most of my life it jumps up & bites you with no warning The begining of the year had a massive reaction to azathioprine medication . rushed into hospital recently could not control my condition with cortizone. My only chance was Remicade .It is not recommended for over 65 s it was administered late at night it worked within a few hours so grateful

It has given me a life which I havent experianced before . Just got to get my strength back .My greatest thanks to Winchester hospital
I have the 2d drawing done to be able to cnc in 2 or 4 parts is there anyone who could undertake the machining for me please .

Many thanks Peter

[JAZZCNC]

It has given me a life which I havent experianced before . Just got to get my strength back .My greatest thanks to Winchester hospital
I have the 2d drawing done to be able to cnc in 2 or 4 parts is there anyone who could undertake the machining for me please .

Hi Old timer. . . . Sorry to hear about your poor health but pleased your feeling better.

Post the drawings and I'll take a look or if you prefer not to post then you can email me. I'll PM you address.

Cheers
Dean

[oldwoodworker]

Thanks Dean will get them tomorrow do have them in pdf file

Peter

[JAZZCNC]

Thanks Dean will get them tomorrow do have them in pdf file

Peter

Ok But I'm away over weekend so Will be next week before look at them.