Does anyone want to build me a cnc router?

[totally useless]

Well in all Honesty No they are Ok for learning and getting your feet wet with CNC.!! But if you want longevity and decent quality work for prolonged periods then they do fall short. The Electronics are the worst area which is important for a good CNC machine.

To be honest if you haven't got the means to build your own then I suggest you look for a Second hand 6040 spending the least you can. Then just use it untill you have saved some more money. While in the mean time you'll have a better understanding of CNC and what you want from a machine then look at building your own or had time to make the 6040 earn enough so it pays for a new better machine.

Forget Kit's as most I've seen are weak and flimsy being nothing more than get your feet wet toys.!!

If I wasn't so busy I'd offer to help you build a machine but unfortunatly I've no time free for a long time.!

once again jazz,
thanks for your reply. what sort of money would you guess would buy me a cnc router that would be good enough?
thanks
peter

[JAZZCNC]

once again jazz,
thanks for your reply. what sort of money would you guess would buy me a cnc router that would be good enough?
thanks
peter

Well very hard to answer that because there are many variables. If your talking about buying a Machine in the 6040 size then your into 2K+ for anything like decent quality.
If on the other hand your going to try building your own then 2K will get you a Very Very nice machine that would be 3-4K if you bought it from a company.
Your original budget of £1250 would build a very capable small machine with some careful purchasing.

If you have some tools and mechanical knowledge then it's not difficult building a machine, the electronics are not difficult and with some hand holding they are easily do-able for even those with limited knowledge.
I will gladly help you regards info on what to buy and where, which is often the hard part for new builders. IF you do fancy having a crack then I'll give you my phone number so you have someone to turn too for advise. I've done this for many people and helped people with absolutley no knowledge of electrics build very nice CNC machines.