Saving machine settings between sessions

[Neale]

I'd assumed that you needed to approach end-on to get repeatability, but knowing that you can take a safer approach and still get good results is useful info.

[JAZZCNC]

I'd assumed that you needed to approach end-on to get repeatability, but knowing that you can take a safer approach and still get good results is useful info.

Again it's down to how you approach or more the point the speed you approach. If you fly upto the switch then yes repeatabilty will drop but as you could see at 1mtr min it still did a good job with the side approach. How much better it would be end on I'd have to test to find out but that will have to wait for another time as this machines due to leave me soon.