Recommend me a Laser cutter.

**Gasgasbones** · 07-06-2015

Cheers Komatias,
Im concerned about backup if things go wrong, spares and email help etc. Not sure if all ebay sellers can provide this, any experiences with your girlfriends model ?

**Gasgasbones** · 07-06-2015

They look pretty good to me !! Nice website and professional.
https://www.epiloglaser.co.uk/index.htm

**shoeswith** · 07-06-2015

Originally Posted by Gasgasbones

They look pretty good to me !! Nice website and professional.
https://www.epiloglaser.co.uk/index.htm

Yes epilog are amazing machines if you are willing to pay many thousands of pounds for even their smallest model. Look for a company who can actually serviceor repair a machine in the Uk and who carry spares when buying a Chinese machine. Its great if you can find a company who will deliver and help set up the machine.

**komatias** · 07-06-2015

Originally Posted by Gasgasbones

Cheers Komatias,
Im concerned about backup if things go wrong, spares and email help etc. Not sure if all ebay sellers can provide this, any experiences with your girlfriends model ?

Hi

The machines are minimal in terms of elelctornics so most parts can be sourced on ebay. The only expensive part and maybe difficult to get is the laser tube. The sellers are pretty good at responding too. As for the software, it is basic but good enough for the job.

see example 6mm pine, cut at 90% power 20mm/sec, engraving 30% power 200mm/sec:

The good bit is you can send data to the machine through USB, Ethernet or just plug a usb stick in.