New Build-12x6ft Plasma Table

[F1transportationserv]

wow guys thanks for the replies there great so far.

silyavski I was thinking of something like the image at the end of your quote build my table first use it if I need to then progress to cnc it asap. I'm new to this whole scene but I willing to try anything as long as I'm learning from it and it has something to do with my industry.

I'm thinking of a bench approx 12'6 x 6'6 so I can sit a 12x6 sheet onto it with finger or hook room. Might even place it in a room 20x8 ish with a little overhead gantry to keep it all tidy away.

The table will probably be 75x75x5 square tube and 50x50x5 square tube with a water tray similar to this.

And the left/right sides will probably be the 140x140x6mm at least. What will I make the gantry out of?