Stepper problem

[eurikain]

@JAZZ here you are :D ! Thought you were on vacation :D (check you inbox ;) ). Can you recommend me a decent (please think about my student budget haha) one ?

[JAZZCNC]

@JAZZ here you are :D ! Thought you were on vacation :D (check you inbox ;) ). Can you recommend me a decent (please think about my student budget haha) one ?

I had seen PM just ignoring you. . .Lol . . . No it just slipped my mind.

I am thinking about your Student budget and you can't afford to not get one. I told you before not to buy drives or anything because wasn't your problem but you didn't listen.!! . . . . Some folks just need to learn the hard way.!. .

[eurikain]

I knew it haha :D !

Ohhhh I see :) I know you told me that, but honestly, don't you think I am better off with AM882 and the good Nema23 from CNC4YOU ?

I was just kidding about the budget. I am very happy I got good drives and motors, and a good linear PSU because I know that when I build another machine I can re-use those :)

Put the budget on the side. At this point I don't care anymore, I just want a good machine that will run smoothly. Can you still recommend a decent board :) ?

[JAZZCNC]

Ohhhh I see :) I know you told me that, but honestly, don't you think I am better off with AM882 and the good Nema23 from CNC4YOU ?

Yes I do but that wasn't your problem at the time so in that context then No. The reaity is that you may have found just fitting a Motion control card from the start would have full fulled all your needs.?

But now you have gone this far then I'd say finish it properly with Motion control card. Given the fact you have BoB's and it's router with slaved axis then I'd say ESS Smooth stepper. So drop George (Komatis) a line and he'll sort you out I'm sure.

[eurikain]

Thank you Jazz :) I will follow your instructions :)

[komatias]

Thanks for the promo Jazz!

Eurikain,

I will be in Antewerp over Christmas. If you are not in the area, I can pop an ESS in the Belgian post and save you a bit of money on postage from the UK

[eurikain]

Great ! Have family around ? Be careful, I've heard Belgium's not safe these days lol :D Oh Dear, I live 30 minutes away from Brussels :) I'll PM you so we save this thread some bad jokes :)

[JAZZCNC]

Thanks for the promo Jazz!

No problem just remember this( and the others) when I want one. .