Build Log - Herbert

[komatias]

Hi,

just noticed you have a board that links between the BOB and the 0-10V line on the VFD. Is this correct?

From the photo you have used, I think that your BOB is actually able to regulate the 0-10V on its own without an additional input. Worth reading the manual on that to double check.

[nairepooc]

Hi,

just noticed you have a board that links between the BOB and the 0-10V line on the VFD. Is this correct?

From the photo you have used, I think that your BOB is actually able to regulate the 0-10V on its own without an additional input. Worth reading the manual on that to double check.

The BOB I have which is the KK01 from cnc4you does not allow connection to the VFD to control the spindle. I asked cnc4you and there is some legal or safety issue.
So that the previous drawings are all wrong.
Looking through posts from m_c, RouterCNC and Jazzcnc I have gotten certain ideas and now I have purchased the correct BOB from cnc4you I can control the VFD via the BOB.
Thanks for taking the time to view my build thread.