. .
Page 1 of 2 12 LastLast

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Forgive me my ignorance, but how is that better than my 10 euro multimeter from lidl pdm 250 a2? I see the bench one could measure temperature, but i have very good laser gun thermometer to 1300C . Anything else that one might need ? In the DIY CNC line of things i mean.

    Click image for larger version. 

Name:	multimeter.PNG 
Views:	494 
Size:	515.6 KB 
ID:	19004
    project 1 , 2, Dust Shoe ...

  2. #2
    Quote Originally Posted by Boyan Silyavski View Post
    Forgive me my ignorance, but how is that better than my 10 euro multimeter from lidl pdm 250 a2?
    In terms of measurement ranges, it does frequency, capacitance and temperature >230C. It has a large back-lit display and can be mains powered. Otherwise it is functionally the same as the lidl one, I guess.

    BUT it is a Bench Multimeter, and I reckon it is big enough to use as a bench .

    Rob
    Last edited by cropwell; 11-08-2016 at 01:08 PM.

  3. #3
    I reckon it is big enough to use as a bench .
    Or a door stop when you blow it up Rob
    ..Clive
    The more you know, The better you know, How little you know

  4. #4
    Quote Originally Posted by Clive S View Post
    Or a door stop when you blow it up Rob

    That's the multi in multimeter. Another advantage is that you are more likely to notice if one of those thieving sparkies tries to make off with it !
    Last edited by cropwell; 11-08-2016 at 01:44 PM.

  5. #5
    Quote Originally Posted by cropwell View Post
    That's the multi in multimeter. Another advantage is that you are more likely to notice if one of those thieving sparkies tries to make off with it !
    Don't be daft they wouldn't be seen dead with anything less than a fluke, when/if they can find it amongst all that mess they call a work van :D

    AvE of youtube did an interesting video recently:

    https://youtu.be/XDm5BfRrAsg

    Then a follow up:

    https://youtu.be/rJm9iCha-jM

    .Me
    Last edited by Lee Roberts; 11-08-2016 at 06:02 PM.
    .Me

  6. #6
    Quote Originally Posted by Lee Roberts View Post
    Don't be daft they wouldn't be seen dead with anything less than a fluke, when/if they can find it amongst all that mess they call a work van :D

    AvE of youtube did an interesting video recently:

    https://youtu.be/XDm5BfRrAsg

    Then a follow up:

    https://youtu.be/rJm9iCha-jM

    .Me

    this is a great video channel, quite refreshing disassemblies of stuff
    project 1 , 2, Dust Shoe ...

  7. #7
    Quote Originally Posted by Boyan Silyavski View Post
    Forgive me my ignorance, but how is that better than my 10 euro multimeter from lidl pdm 250 a2?
    You obviously don't understand multimeter snobbery, if you pull anything less than a well used Fluke 17B out of your bag you cannot hope to be taken seriously. I laugh at your Lidl multimeter, "ha!"

  8. #8
    Quote Originally Posted by Robin Hewitt View Post
    You obviously don't understand multimeter snobbery, if you pull anything less than a well used Fluke 17B out of your bag you cannot hope to be taken seriously. I laugh at your Lidl multimeter, "ha!"
    Or the good old Avo 7
    ..Clive
    The more you know, The better you know, How little you know

  9. #9
    Quote Originally Posted by Clive S View Post
    Or the good old Avo 7
    Practically on the same spiritual plane as the orca. I envy your Avo 7, but only if you have the case

  10. #10
    Quote Originally Posted by Robin Hewitt View Post
    I envy your Avo 7, but only if you have the case
    - In burnished leather.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CNC pneumatic bench clamp
    By joss01 in forum General Discussion
    Replies: 0
    Last Post: 17-11-2018, 05:47 PM
  2. Bench-top or welded frame
    By Doddy in forum Gantry/Router Machines & Building
    Replies: 22
    Last Post: 05-03-2018, 07:45 PM
  3. Welding bench
    By Boyan Silyavski in forum Metalwork Project Showcase
    Replies: 4
    Last Post: 12-07-2015, 05:01 PM
  4. WANTED: Boxford 160 tcl bench top cnc lathe
    By sbdtasos in forum Items Wanted
    Replies: 1
    Last Post: 09-07-2015, 07:48 AM
  5. Bench Top Mill
    By Wobblybootie in forum Milling Machines, Builds & Conversions
    Replies: 2
    Last Post: 04-06-2010, 06:57 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •