EM806 vs AM882

[dachopper]

I'd have to agree with the fact that it looks identical, with exactly the same specifications...

I'd be dubious that they changed anything aside from the stamp - as if they had of, surely they would have advertised the fact.

plus, most of the em806's are 2x the cost of the am882's

[Clive S]

I'd have to agree with the fact that it looks identical, with exactly the same specifications...

I'd be dubious that they changed anything aside from the stamp - as if they had of, surely they would have advertised the fact.

plus, most of the em806's are 2x the cost of the am882's

Probably this;- User password protection prevents others from copying your drive configurations
Optimizes torque and nulls mid-range instability

Go with the Am882

[JAZZCNC]

I'd have to agree with the fact that it looks identical, with exactly the same specifications...

I'd be dubious that they changed anything aside from the stamp - as if they had of, surely they would have advertised the fact.

plus, most of the em806's are 2x the cost of the am882's

No there is a distinct difference between them in use. The EM is smoother at lower RPM. However the difference isn't enough IMO to warrant buying the EM over the AM if using on router. If was a Mill then I'd say yes go with EM because there is enough difference.