New machine has knackered control box :-( Need a new one

[ravihotwok]

I cant afford that at the moment, I am also woried about the scenario of me shipping the machine back to china, then it getting damaged and im left high and dry, or just with even more complications. If this control box is any good then I will be happy to purchase it and then upgrade the machine once I have learned how to actually use it. I think the control box should be more than up to controlling a bigger/better machine?

The seller is very difficult to communicate with, asked for a video so I sent a link to you tube:

https://www.youtube.com/edit?o=U&video_id=yKfTXJvyGBM

I have suggested sending just the control box back and them sending a new one, I think this would be the easyest and easiest way to resolve this.

Its my fault for buying cheap tat but I really need to try and get it up and running asap.

Currently waiting on a reply from them now.

Are those boards you mentioned? I was going for the planet product simply as I have the licensed software so thought I would get very good support from them? (which i obviously need)

[Desertboy]

Are those boards you mentioned? I was going for the planet product simply as I have the licensed software so thought I would get very good support from them? (which i obviously need)

https://github.com/grbl/grbl

it's open source 3 axis solution (No 4th axis) support is very good on forums.
If you use an Arduino mega (Add another £5) 4th axis is possible with grbl
https://zapmaker.org/arduino/program...e-on-mega2560/

That said check you're wiring I bet there's nothing that wrong with the electronics just dodgy connections.

Get that box with the electronics open and get some photo's from inside.