Help needed to choose a machine.

[ChrisJ]

Hi Sean

After doing a fair bit of research, the AccTek 6090 emerged as a reasonably well built and cost-effective machine for my needs. The import and delivery costs do add a fair bit to the price, mind you. I can PM the details if you like. If I may - a word to the wise on any shipping costs the manufacturer quotes: I was quoted very low prices for shipping using the manufacturers choice of shipping company but this is usually a loss leader for the shipping co which can then clobber you at the UK end with unexpectedly high fees. For the sake of transparency, ask for the FOB price and get a UK freight forwarder to get you an all-in quote. Apologies if you know all this already but it was all new to me.

I've not pulled the trigger yet on the Acctek machine for a couple of reasons - one of them being Clive putting into my head the idea of building my own! I've been reading the build logs on this forum and I think that with some help from wiser heads than mine, a self-build might be feasible although the electrics side of things worries me a bit.

Anyway... enough rambling! Best of luck with whatever decision you make. There's a ton of useful information in these forums, as you'll have seen, so happy researching.

Chris

[Clive S]

I've not pulled the trigger yet on the Acctek machine for a couple of reasons - one of them being Clive putting into my head the idea of building my own! I've been reading the build logs on this forum and I think that with some help from wiser heads than mine, a self-build might be feasible although the electrics side of things worries me a bit.

Chris Have you seen Joe's excellent build including the control box. Here is his channel https://www.youtube.com/channel/UCXl...iuKi2aixoM-cOA

You will get all the help you need from the guys on here to help with the questions.

[ChrisJ]

Morning, Clive.

Yes, I've been following Joe's build log and videos with great interest and respect. I'm impressed by what can be achieved with patience, a methodical approach, ingenuity and the guidance of the folk here. Not sure I'd be as brave with regard to routing aluminium by hand though, so I'd probably have to outsource some of the work.

Thanks for the link - the control box build doesn't look impossible but I'd need to do my homework as I've never done anything like that before.

I'll definitely start a build log in the next few days. I'm still doing my homework as I don't want to ask any questions that have been answered previously in these pages, and any design I come up with will definitely be a slight evolution of existing designs in order to accommodate the features I think I need.

But back to Sean - shippo.co.uk was the company that I approached re shipping from China. There is a lot of very useful info on their website and they were very helpful in answering my questions, so that would be my recommended first port of call. No pun intended...