Best anodizing guide?

[Desertboy]

I thought the solution was mostly acid, sulphuric has an SG of 1.85! It's 85% heavier!

But is floating even an issue? and I'm sure a clamp can by rigged up rather quickly if this was an issue.

[JOGARA]

The acid baths are not heated so no need to bucket within a bucket to heat?

[Zeeflyboy]

I thought the solution was mostly acid, sulphuric has an SG of 1.85! It's 85% heavier!

But is floating even an issue? and I'm sure a clamp can by rigged up rather quickly if this was an issue.

Not that it changes your point, but most definitely not "mostly" sulphuric acid... in fact it's pretty dilute using the LCD process. Somewhere around 1 part acid to 15 parts water by volume for 6 asf.