Search:

It's been about 2yrs since I last fit one but I'm sure you can get one or config it for a One-shot setup, where you pulse it and it pumps for a set time. You don't have to use the auto timer option....

This guy in this video...


https://youtu.be/AZhtmUoLKWQ

...checked it out and considers it's good enough to start with but he says he prefers the Hantek 5072...

...

The 1054/1074 that I mention are 4-channel scopes - I made a conscious decision to go big. I've probably used it in 3-channel mode about 5% of the time. A 2-channel scope is probably enough for most...

Horses for courses, all down to how much use you expect to get out of it. And how much you want to spend




Cute, and useful, all in a small package. It will work for most of what you're...

Ross check your email:

That would probably be this 8x4 then. 10 x 5 with a Vacuum bed will be coming soon if I ever get out of this bloody house again.!!.

The vertical machine works amazingly for large machines with no...

Ross This link shows error 404 but the one you sent me was fine.

Im slowly compiling parts to build a "Voron", http://vorondesign.com/voron2.1

Alex

Ross, I need to eat a bit of humble pie in a way. I have both tapers at my works and tested your idea. Much to my surprise the actual taper appears to be the same and the and it fits in a R8, and...

I'd price the different options up.

How much are a pair of drives suitable for those motors?
How much would it cost if one of those motors died (the actual motor is unlikely, but the encoder...

This is Fred send him an email asking for a quote with the lengths you want along with other stuff.
At this moment in time because it's their holidays he'll probably not quote you for lengths above...

From what I remember, you can trace the step/dir control pins back to the original controller chip.

However, they are 80s technology, and I don't think it would be worth the hassle. Even a couple...

ASA is another good option, it's basically got all the properties of ABS but significantly less warp, less odour when printing and better UV resistance. I've tried formfutura's ApolloX with pretty...

Yes, if something dies you get the pleasure of soldering to fix it ;-)

Smoothie can be independent or host controlled, depending on what LCD / TFT controller you want to use with it; i believe it can be operated from octoprint, it does have its own Web Interface to be...

Smoothieware has a reasonably well commented text config file on the SD card which you simply edit in a text editor on your PC then reboot the smoothie.
That makes smoothieware even simpler to...

The firmware for this can be found here
https://github.com/St3dPrinter/Marlin4ST

What firmware is it supposed to use?

If you want a solution like that i am personally using MKS products, the MKS SBase and MKS TFT32. The S Base is a smoothieboard clone which obviously uses...

Inspired by this thread, and on a bit of a rush of blood, i decided to buy a Wanhao Duplicator i3 Plus....

XT-CF20 and Carbonfil (I can't tell much difference between the two in how they print or the end results) are the only materials I've ever used that literally just don't seem to suffer from any...

I'd look at a rapsiberry pi solution, cheap as chips and can add 4" colour touch screen for a £10

As for 24v
The difference you will notice giving the nema's 24v is not like with nema 23's lol,...

24v better all round. My printer was originally 12v, they later changed newer models over to 24v and I upgraded - steppers happier, bed heats up much faster, hot end a bit faster.

In my personal opinion, a heated bed is a huge plus. I'm not a big fan of ABS but there's a cornucopia of options out there and most are much easier with a heated bed.

My personal favourite...

I made longer 3 of the wires and soldered all the connectors inside. As main problem here is i live 200m from sea and typical humidity is 85% so even crimped connections will fail sometimes.
...

Andrew Mawson has one, https://www.cetus3d.com/. Fairly well priced, imported machine but uses hiwin rails for the structure. Ive seen the prints it does, really impressive.