Search:

Just a warning - there is a scammer who keeps listing a Boxford machine on ebay at a low starting bid price. He asks you to email him for the buy it now price. He replies by email and gives you a low...

Like many (I assume) I had grown to love having the features of a full 3D parametric modelling available to me for my home projects, not that I often need all the power it provides. The removal of...

http://site.iugaza.edu.ps/aabuzarifa/files/METRO20152_CH4.pdf

Rip off merchants KJN try these lads. Based in Germany but yet I can get them quicker and cheaper than from KJN and lot more accurately cut.

https://www.motedis.co.uk/shop/index.php

Hi Rob,

I've downloaded your STL and replicated the problem in Cura.

I then opened it in solidworks, and it looks hollow... resaved the STL and same problem.

Then I ran the import...

how about here
https://908ltd.co.uk/

lower the rpm or increase feed. The problem you are having is heat generation so you need to remove that heat, The main way to do this is by removing a large amount of material that carries the...

Hi Rob, don't know if this will help you or not, I just loaded an image into vectric aspire and used the "trace" function. Maybe you can do something with it if not suitable.

25784

this link should be of interest

https://www.model-engineer.co.uk/forums/postings.asp?th=126135&p=1

John

Hi Rob,

I downloaded your files, combined 'em and saved back out as a .dxf and a .pdf - sizes were a bit screwy - I take it you don't want a switch surround that's 1.5 metres across..? - Although...

Probe-It is ideal for contouring, but it doesn't really do Z digitising other than for basic probing for establishing heights.

If a bed of nails approach would work for you, then Mach already has...

Looks like with the right version of FlashAir you can, but it's not an intended or supported function :D

https://mattshub.com/2017/04/11/flashair-sd-card/

Online rather than a book but I always find myself referring to this.

It's covered in this -

https://www.gov.uk/guidance/electrical-equipment-manufacturers-and-their-responsibilities

You'll need to read the attachments too for the relevant information, I don't...

Ok well not exactly sure what your asking here.? Are you asking if the Brain can do this or if you can do this while the brain is running.?

Brains run all the time in the background and only watch...

Because it's a REGION.
Explode the REGION, and use PEDIT to Join the lines into a single polyline.

Always save as V12 .dxf, for best compatibility.

Rob are you trying to convert it to DXF if so here it is

17800

I recommend these machine paints, great colours and really nice finish if applied with a brush or spray...

http://www.stationaryengineparts.com/Workshop-Machinery-Colours/

They sell a good...

Without seeing some proper details for the relays, it's hard to say, however given the physical size and type of relay, I'd say you'll be fine.
I've used similar sized relays from RS, and I'm sure...

Hi Rob,

I don't have that control board but I would have thought that you could use the V = IR equation to check. If the relay coil is more than 96 ohms then it shouldn't draw more than 250mA at...

http://www.machsupport.com/Mach3Wiki/index.php?title=Standard_Hotkeys

The cooling fan is needed for small parts - if they're not cooled, heat builds up in the part and it melts. The fan is normally off for the first layer and is then turned on for subsequent layers -...

Yes, the spindle should be inside the footprint of the 4 gantry bearings, this is the key diagram; http://www.cncroutersource.com/do-it-yourself-CNC-router.html

Two options:

A) use a separate 5v usb 'charger' (wall wart)

B) my preference - use a 24v to 5v buck converter, e.g. eBay item 221546337415 - there are lots like this with either USB or screw...

Hi,
i happen to be a pro :tears_of_joy: photographer, apart from all.

FYI the real proper way to this is the following:
You need camera, tripod, contrasting wall/best buy from ebay proper green...