. .

Thread: New start

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 20-03-2018 #1
    Nr1madman's Avatar
    Lives in trosa, Sweden.
    Nr1madman
    Last Activity: 20-04-2020 Has been a member for 9-10 years. Has a total post count of 492. Received thanks 91 times, giving thanks to others 11 times.
    If anyone have the same problem as I had with uc300usb and e stop then I think I found a fix.

    I hadn't made an error connecting it but it had a jumper that controlled if it was powered via usb or external 5v.
    I had it on usb supply apparently and this somehow got triggered by e stop (interference or current surge/dip?) Causing the controller to loose connection to uccnc.

    Now I have tried it with power from stable 5v supply and nothing happens with the connection when e stopping, well except the pc senses e stop as it should :D


    Skickat från min SM-G955F via Tapatalk
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Nr1madman For This Useful Post:

    Nickhofen
  3. 20-03-2018 #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by Nr1madman View Post
    If anyone have the same problem as I had with uc300usb and e stop then I think I found a fix.

    I hadn't made an error connecting it but it had a jumper that controlled if it was powered via usb or external 5v.
    I had it on usb supply apparently and this somehow got triggered by e stop (interference or current surge/dip?) Causing the controller to loose connection to uccnc.

    Now I have tried it with power from stable 5v supply and nothing happens with the connection when e stopping, well except the pc senses e stop as it should :D
    That's USB for ya.!!. . . . Like Box Chocolates.?
    Reply With Quote Reply With Quote
  4. 21-03-2018 #3
    Nr1madman's Avatar
    Lives in trosa, Sweden.
    Nr1madman
    Last Activity: 20-04-2020 Has been a member for 9-10 years. Has a total post count of 492. Received thanks 91 times, giving thanks to others 11 times.


    moooving :D
    Reply With Quote Reply With Quote

  5. The Following 2 Users Say Thank You to Nr1madman For This Useful Post:

  6. 21-03-2018 #4
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Another one Lives. Well done that man.
    Reply With Quote Reply With Quote
  7. 21-03-2018 #5
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 5 Days Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,345. Received thanks 618 times, giving thanks to others 87 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    It's always nice to see a machine move for the first time
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote
  8. 21-03-2018 #6
    routercnc's Avatar
    Lives in West Midlands, United Kingdom.
    routercnc
    Last Activity: 3 Weeks Ago Has a total post count of 1,751. Received thanks 415 times, giving thanks to others 77 times. Referred 3 members to the community.
    Nicely done !
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4
    Reply With Quote Reply With Quote
  9. 21-03-2018 #7
    driftspin's Avatar
    Lives in Laetste Stuyver Dorp, Netherlands.
    driftspin
    Last Activity: 1 Week Ago Has been a member for 9-10 years. Has a total post count of 327. Received thanks 34 times, giving thanks to others 94 times.
    Quote Originally Posted by Nr1madman View Post


    moooving :D
    Looking good !

    Verstuurd vanaf mijn SM-A320FL met Tapatalk
    Reply With Quote Reply With Quote
  10. 21-03-2018 #8
    wallyblackburn's Avatar
    Lives in Pataskala, United States.
    wallyblackburn
    Last Activity: 31-07-2024 Has been a member for 7-8 years. Has a total post count of 61. Received thanks 13 times, giving thanks to others 1 times.
    Woohoo!!! Nice!!!
    Reply With Quote Reply With Quote
  11. 21-03-2018 #9
    Desertboy's Avatar
    Lives in Leicester, United Kingdom.
    Desertboy
    Last Activity: 14-06-2025 Has been a member for 8-9 years. Has a total post count of 1,005. Received thanks 85 times, giving thanks to others 756 times.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: We all need to start somewhere!
    By Realtime in forum New Member Introductions
    Replies: 0
    Last Post: 16-05-2017, 08:43 PM
  2. NEW MEMBER: A new start for me.......
    By Nthkentman in forum New Member Introductions
    Replies: 4
    Last Post: 23-08-2014, 10:50 AM
  3. Where to start?
    By Inquisitor in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 27-11-2012, 02:35 PM
  4. where to start
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 22-09-2012, 11:29 AM
  5. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 12:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules