Here we go again . . . MK4

[routercnc]

Hi Mike
I went 150ml as I remember reading that 6 pumps was max before mixing. To be honest now I've done one round of this I think doing it in one shot would work OK. Maybe rig up a cordless drill on a stand with bent wire in the chuck and run this slowly between every 150ml added and then one final stir at the end.
Chaz
Would be interest in the Diamant. The 1kg epoxy kit i used was about £40 plus postage, how much was your kit ?
I'm expecting to have to dial in the last bit of level so would be interested in how you got on.

[Chaz]

Hi Mike
I went 150ml as I remember reading that 6 pumps was max before mixing. To be honest now I've done one round of this I think doing it in one shot would work OK. Maybe rig up a cordless drill on a stand with bent wire in the chuck and run this slowly between every 150ml added and then one final stir at the end.
Chaz
Would be interest in the Diamant. The 1kg epoxy kit i used was about £40 plus postage, how much was your kit ?
I'm expecting to have to dial in the last bit of level so would be interested in how you got on.

If you buy it in the UK, around £200 per litre. Its pricy stuff.

I paid less via a friend in Germany.

[driftspin]

If you buy it in the UK, around £200 per litre. Its pricy stuff.

I paid less via a friend in Germany.

Oh wow. 200 per kilo?

I paid 75€ for 3 kg.

Not West though.


Verstuurd vanaf mijn SM-A320FL met Tapatalk

[Chaz]

Oh wow. 200 per kilo?

I paid 75€ for 3 kg.

Not West though.


Verstuurd vanaf mijn SM-A320FL met Tapatalk

What do you mean with 'No West though'?

[driftspin]

What do you mean with 'No West though'?

I was unable to get 105 icw 209 so i looked for a alternative epoxy.

With similar end strength properties an slow hardning like west 105 / 209.



Verstuurd vanaf mijn SM-A320FL met Tapatalk

[Chaz]

I was unable to get 105 icw 209 so i looked for a alternative epoxy.

With similar end strength properties an slow hardning like west 105 / 209.



Verstuurd vanaf mijn SM-A320FL met Tapatalk

Ok, however different application here.

[routercnc]

Episode 16 is now ready. Having another go at the epoxy leveling . . .