OMC-Stepperonline.com, 5% Discount for members.

[Lee Roberts]

Additionally,

I've been able to arrange a 5% discount code for forum members to use!

The code is below, simply add it to your cart when checking out on their website and the discount will be applied.

Coupon Code: MYCNCUK

I have also tested their service and ordered a set of their Nema24 3.1Nm stepper motors: Nema 24 CNC Stepper 3.1Nm (24HS34-3008D), they seem to be a very good match spec wise on the 3.1Nm motors we typically use and recommend on the forum.

I've attached some pics of how I received the motors and everything went well:



DataSheet:

http://www.mycncuk.com/attachment.ph...7&d=1568888995

You'll note I said Nema24 not Nema23 ?

As far as I could tell at the time, the 3.1Nm motors we usually suggest from CNC4YOU: Stepper Motor Kit 3.1Nm x 3 Axis + 3 Mounts Nema23, are pretty much the same, the only difference I could see was the Rear Shaft and Wire length.

DataSheet:

http://www.mycncuk.com/attachment.ph...6&d=1568888945

They have UK stock for allot of items and multiple EU warehouse locations they can ship from, I actually had to wait for their UK stock to be replenished and as i wasn't in a rush that's what I did, of course they always have stock in their China location if you don't mind waiting longer and would be happy to pay any import costs.

I ordered on Saturday and the motors turned up at 11:00 Wednesday morning, top marks for the packaging:

Dual Shaft Nema 24 CNC Stepper 3.1Nm (439 oz.in) 60x60x80mm 8 Wires
- Ship from: United Kingdom

Sub-Total: £79.48
Coupon (MYCNCUK): £-3.97
Royal Mail Tracked 48: £2.83
Total: £78.33

[Kitwn]

Well done Lee!

I've bought motors and drivers from Stepperonline (usually the Australian warehouse) for several projects and always been happy with the service, prices and products.

Kit

[JAZZCNC]

You'll note I said Nema24 not Nema23 ?

As far as I could tell at the time, the 3.1Nm motors we usually suggest from CNC4YOU: Stepper Motor Kit 3.1Nm x 3 Axis + 3 Mounts Nema23, are pretty much the same, the only difference I could see was the Rear Shaft and Wire length.

Have you measured the Outside Lee. Usually nema 24 are 60mm while nema23 are 56mm.!

[Kitwn]

It's my understanding that the NEMA size is the width of the frame in tenths of an inch.

Kit

[Lee Roberts]

No because I new that already...or did you want me to so as to confirm?

That's what caught my eye, I think the units from 4U are actually Nema24 because the tech doc for their motors says a 60 frame...

They do have other nema 23 stepper motor listings, the x3 offer is here: https://www.cnc4you.co.uk/Stepper-Mo...YGH301B-Nema23, that shows a slightly different model number of 60BYGH301B vs the doc for all of the motors reading 60BYG301B...

Those listings do show a different looking unit...they all show as out of stock at the mo...maybe there phasing out the ones below or something:



I don't suppose any of this matters really just my observations, all I really wanted to do is share that OMC are cheaper and seem to have a pretty ridiculously good like for like motor...

If the CNC4YOU listings and documents are correct of course...

Thanks Kit,

Yea its 2.3" and 2.4", I've always just called them 57mm or 60mm...

[diylover]

Hi Lee, thanks for your support! We are offering big discounts on some hot sale products, up to 43% off! Have a look if you are interested. https://www.omc-stepperonline.com/sale.html/

[federed]

I also bought motors from Stepperonline,