Epoxy granite vertical mill build log

[Nick]

More progress, rails installed, steppers installed on temp 3D printed mounts, temporary head and spindle.

First axis movements (Y axis not working):

https://www.youtube.com/watch?v=rAVX...ature=youtu.be



Next steps:

Alignment, use mill to mill better mounts, mill permanent head BT30, servos, way covers.

Does anyone have any experience with the cheap AC servo's on aliexpress? In particular the 60ST-M01930? Not found much on these.

Has anyone bought way covers from aliexpress? I was thinking about getting some "Armoured bellow cover"?

Nick

[JAZZCNC]

Does anyone have any experience with the cheap AC servo's on aliexpress? In particular the 60ST-M01930? Not found much on these.

Where you located Nick.? Says E yorks.? Anywhere near Goole.

I've got some 400W waiting to go on a machine which are exactly the same drives and motors just lower power. So if you want to have a play with them on the bench your welcome to come over. For the money, they can't be beaten.

Edit: Actually just had thought.? They could actually be 600w I had set of 400w and 600w but fitted one set to a machine and I think they where the 400w. I'll Check when I get back to work on Monday.