CNC Router Design Using 3D CAD Software

[Kitwn]

I gave up trying to do two complex things at once, learn how to master Fusion 360 at the same time as designing my machine, and used paper and pencil instead. The stress level dropped significantly and the machine got built a lot sooner.

[Sterob]

I gave up trying to do two complex things at once, learn how to master Fusion 360 at the same time as designing my machine, and used paper and pencil instead. The stress level dropped significantly and the machine got built a lot sooner.

Yes....That might be the case as well....Hard to visualise the design but you may be right Kit....lol
Fusion won't let me log in now so it all may be moot....lol

[CaptainBarnacles]

I gave up trying to do two complex things at once, learn how to master Fusion 360 at the same time as designing my machine, and used paper and pencil instead. The stress level dropped significantly and the machine got built a lot sooner.

That is some really good advice!

I have been struggling with Fusion (although I do think I am starting to get to grips with it now) and trying to design my machine with it. I have persevered but with hindsight I would probably have a fully operational machine now if I had just drawn it out by hand (and cut down on the procrastination!). Instead I still have a pile of components and 14 iterations of my machine's design!

[Kitwn]

That is some really good advice!

I have been struggling with Fusion (although I do think I am starting to get to grips with it now) and trying to design my machine with it. I have persevered but with hindsight I would probably have a fully operational machine now if I had just drawn it out by hand (and cut down on the procrastination!). Instead I still have a pile of components and 14 iterations of my machine's design!

I do think F360 is an amazing piece of software, especially at the price, and would recommend every beginner to get it and learn how to use it. My aging brain just seems to be having a problem holding onto it's details. I use CamBam which is not a 3D package but very capable and far more intuitive to use, especially for an old f**t like me who was raised on 2D drawing software in the early 1990s.

[Sterob]

That is some really good advice!

I have been struggling with Fusion (although I do think I am starting to get to grips with it now) and trying to design my machine with it. I have persevered but with hindsight I would probably have a fully operational machine now if I had just drawn it out by hand (and cut down on the procrastination!). Instead I still have a pile of components and 14 iterations of my machine's design!

Thank you gentlemen...You have made sense and I will stick with 2D drawings.
I have found it far easier to make reasonable progress and I can do without struggling with learning 3D at this time.
I'm 54 soon, so new tricks take longer to learn....lol

[Kitwn]

I vaguely remember being 54...
Actually it wasn't THAT long ago, just seems like it on some days

PS When I was at school (back in the day when men walked on the moon every few months) they taught me how to do isometric drawings.... On paper!! With a Pencil!!!!! That knowledge has been very useful in the evolution of my CNC adventure.

[Sterob]

they taught me how to do isometric drawings.... On paper!! With a Pencil!!!!!

Yep.....me too...lol

[routerdriver]

Thank you gentlemen...You have made sense and I will stick with 2D drawings.
I have found it far easier to make reasonable progress and I can do without struggling with learning 3D at this time.
I'm 54 soon, so new tricks take longer to learn....lol

The youngsters of today eh?I will admit to delving into 3D with Rhino in my late forties and it was brilliant in that it wasn't a huge step from 2D Autocad type stuff, just stretched out for the third dimension.It wasn't a huge amount of help to me when it came to learning Freecad in my sixties.On the other hand the free aspect and having the ability to generate toolpaths within Freecad swung it for me.I briefly considered Fusion and couldn't help referencing what Photobucket had just done and I wasn't convinced that Autodesk wouldn't pull the same stunt.I'm happy with my choice.

[CaptainBarnacles]

I briefly considered Fusion and couldn't help referencing what Photobucket had just done and I wasn't convinced that Autodesk wouldn't pull the same stunt.I'm happy with my choice.

I don't know if Autodesk have made any long term commitment to continue with their 'free' license. It would be foolish of them to pull the rug out from under so many users who are so heavily invested (in terms of time rather than money) as many will go on to use Fusion in a professional capacity and therefore pay up for a license. The others may continue to create content such as YouTube tutorials or share their work on sites like GrabCAD which is all good for the product in the long run too.

I don't know what colleges and universities are using these days, Solidworks seems to be the industry standard (just an outsider's observation, I'm no longer in the industry) just like AutoCAD was back when I was at college. But, if the next generation of designers, draftsmen and engineers were to leave education with a Fusion mindset rather than Solidworks it may start to loosen Solidworks' grip on the industry.

I wouldn't object to paying a sensible price for Fusion but there's no way, as a hobbyist, I could pay what they are asking for a full license. Let's hope it doesn't come to that!