looking for ideas to build 5 axis mill turn machine

[John McNamara]

Hi

Look up Edge Precision on You tube
https://www.youtube.com/channel/UCCk...XbS4txqPY7OMxQ

If you want to see industrial millturn machine hardware in action you will not find a better site, The cad cam videos are exceptional.

If I was going to build one this is where I would look for ideas.

Regards
John

[JAZZCNC]

Hi

Look up Edge Precision on You tube
https://www.youtube.com/channel/UCCk...XbS4txqPY7OMxQ

I've followed this guy since he first started posting, the work he does and is knowledge is truly amazing.(Thou he can be boring...Lol)
But John I don't think much could be taken from his videos that could relate to this project.? He's using a 1/4 Million pound Mazak machine with another 1/4 Mil worth of tooling, and even for most experienced DIY'er that's a bit of a job to copy from...

If you want to see industrial millturn machine hardware in action you will not find a better site, The cad cam videos are exceptional.

The same can be said for the Cam Videos, Esprit is the Cam he's using and it costs a fortune for Full simultaneous 5-axis version. Doubt many here will have it or even heard of it.