Hybrid View
-
22-04-2020 #1
It's exactly same as the rails. Why do you need a flat surface.? Just indicate off the side of ball nut or screw. Watch this.
-
23-04-2020 #2
So I can get accurate results. That method is like balancing a ball on top of another ball....
I watched the video, thanks. It shows the person indicating somewhere around the top of the ball screw and then carefully pivoting the mag base and metal plat up so he can move the Indicator up the other end of the ball screw.............I can't imagine that being good engineering practice.
But if thats the way its done, I guess I don't have other choice.
I just thought there might be a better way.
-
23-04-2020 #3
-
23-04-2020 #4
-
23-04-2020 #5
That's problem isn't it. So many way to do it and each machine different so not always possible to do it that way. But end of day it's not rocket science.!
Well yes but easy enough, it's just a case of moving up n down to find high point then lock it off.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Design Study: Rail Inline With Ball Screw
By Bravin Neff in forum Gantry/Router Machines & BuildingReplies: 27Last Post: 08-10-2018, 02:46 AM -
Ball screw advice
By Darren in forum Lead Screws, Nuts & SupportsReplies: 7Last Post: 10-04-2016, 10:52 PM -
How to machine a ball screw
By Tom_Nelson in forum Milling Machines, Builds & ConversionsReplies: 10Last Post: 22-07-2015, 10:50 AM -
Ball screw
By luke11cnc in forum Lead Screws, Nuts & SupportsReplies: 5Last Post: 20-10-2011, 01:28 PM -
Stationary Ball Screw
By Wobblybootie in forum Lead Screws, Nuts & SupportsReplies: 14Last Post: 29-12-2009, 01:12 PM
Bookmarks