. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 09-05-2020 #1
    Kitwn's Avatar
    Lives in Don, Tasmania, Australia.
    Kitwn
    Last Activity: 15-07-2024 Has been a member for 7-8 years. Has a total post count of 983. Received thanks 118 times, giving thanks to others 52 times.
    Quote Originally Posted by JAZZCNC View Post
    If your machine hasn't passed the Aztec test then it's not a real machine yet....
    Now there's a challenge! I don't have Vectric V-carve for which there is a ready-made file available and I've sen a DXF available. Any advice on the best available version or way to cut this? CamBam has a V-carve plug-in but it's not quite up to this job according to it's forum.
    An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
    Reply With Quote Reply With Quote
  2. 09-05-2020 #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by Kitwn View Post
    Now there's a challenge! I don't have Vectric V-carve for which there is a ready-made file available and I've sen a DXF available. Any advice on the best available version or way to cut this? CamBam has a V-carve plug-in but it's not quite up to this job according to it's forum.
    What size do you want Kit.? I'll knock you some code up.
    Is it LinuxCNC you use.?
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 31 users browsing this thread. (0 members and 31 guests)

Similar Threads

  1. BUILD LOG: 3 Axis Router
    By GTJim in forum DIY Router Build Logs
    Replies: 8
    Last Post: 22-06-2020, 08:49 AM
  2. 3-Axis CNC Router - For Helices.
    By Dalmango in forum Gantry/Router Machines & Building
    Replies: 4
    Last Post: 08-02-2014, 07:27 PM
  3. BUILD LOG: Wobbly: my first 3-axis router
    By Sodster68 in forum DIY Router Build Logs
    Replies: 8
    Last Post: 20-01-2013, 10:28 AM
  4. 3 axis cnc/router bed
    By dudz in forum Marketplace Discussion
    Replies: 23
    Last Post: 28-12-2012, 09:38 PM
  5. Need 6' x 4' bed, 4 axis router design.. Help..!
    By fasteddy in forum Gantry/Router Machines & Building
    Replies: 29
    Last Post: 17-09-2010, 12:56 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules