What connector type.

[dazp1976]

How thick are the pins?
Maybe these will fit. Either:
Lipo balance cable 5s (JST-XH).
Or a few 2 pin JST type.

[Doddy]

How thick are the pins?
Maybe these will fit. Either:
Lipo balance cable 5s (JST-XH).
Or a few 2 pin JST type.

XH are 2.5mm pitch - the Duponts are 2.54mm

As Jazz says, grab a bunch of Arduino patch cables and glue them if you want something off the shelf. Or PM.

Edit: JST-RE might fit - they are similar to the Dupont.

[dazp1976]

XH are 2.5mm pitch - the Duponts are 2.54mm

As Jazz says, grab a bunch of Arduino patch cables and glue them if you want something off the shelf. Or PM.

Edit: JST-RE might fit - they are similar to the Dupont.

This is 2.54:
https://www.amazon.co.uk/POPESQ%C2%A.../dp/B06XZV75YW

Or this type:
https://www.amazon.co.uk/POPESQ%C2%A...puters&sr=1-63