Boxford MT2 & Boxford TCL125

**PeterE** · 13-09-2020

Hi,

Regards the Boxford what re-wiring is needed and what has gone wrong with the machine?

**jonnydeen** · 14-09-2020

Originally Posted by PeterE

Hi,

Regards the Boxford what re-wiring is needed and what has gone wrong with the machine?

thanks for the enquiry, I originally got the tcl125 in boxes partially dis-assembled. i had saved it from being parted out. it was sporting its original electronics from the mid 80s albeit in in a box. i got as far as getting the power supply working with a new rectifier, sourcing new stepper drives, breakout board and a few other odds and ends. then it went on the long finger as other machines took precedence. the spindle drive i have not tested but under visual examination appears the two mains filter caps have expired so i have rifa branded replacements to get soldered in. basically everything is there for wiring up.