The remainder of the Zapp Automation Stock

[Robin Hewitt]

I think I have emailed you, I am getting a bit vague in my dotage.

Robin

[Gary]

Robin, not seen an email, also I have checked my spam.

[Gary]

I think I have emailed you, I am getting a bit vague in my dotage.

Robin

Robin,
When i get your email, i will get straight back to you.

[Robin Hewitt]

From: "Robin" <[email protected]>
To: <[email protected]>
Subject: Aluminium tooling plate
Date: Tue, 19 Oct 2021 12:15:49 +0100
MIME-Version: 1.0

From: "Robin" <[email protected]>
To: <[email protected]>
Subject: Aluminium
Date: Tue, 19 Oct 2021 16:39:02 +0100
MIME-Version: 1.0

'snot working

[Gary]

From: "Robin" <[email protected]>
To: <[email protected]>
Subject: Aluminium tooling plate
Date: Tue, 19 Oct 2021 12:15:49 +0100
MIME-Version: 1.0

From: "Robin" <[email protected]>
To: <[email protected]>
Subject: Aluminium
Date: Tue, 19 Oct 2021 16:39:02 +0100
MIME-Version: 1.0

'snot working

Robin,
Got your message now, will email you back later.

[Gary]

Robin,
these are the pictures showing all the aluminium plate, there are 15mm, 20mm, 25mm, 30mm and 35mm plate, and also a small amount of 10mm.
These are a few pictures showing how much there is.
I have put it all on one pallet, but will likely need to cut the 35mm piece to correctly fit the pallet width.
the 15 and 30mm pieces are about 1M square. the 35mm, is about 1.4M long. and the 25 is made up of a number of offcuts.
the 20 not fine milled.
Can you get back to me as soon as you can, because I need this gone quite quick.
As you can see its a good deal for £500.
a 1M by 1m piece of 30mm tooling plate from aluminiumwarehouse works out to be £1500, so well worth the £500 I want for it.
If you want me to send it, I will charge an extra £55 to deliver it by pallet.

From: "Robin" <[email protected]>
To: <[email protected]>
Subject: Aluminium tooling plate
Date: Tue, 19 Oct 2021 12:15:49 +0100
MIME-Version: 1.0

From: "Robin" <[email protected]>
To: <[email protected]>
Subject: Aluminium
Date: Tue, 19 Oct 2021 16:39:02 +0100
MIME-Version: 1.0

'snot working