Please Help me before I find Hammer

[m_c]

That linked thread partially explains why I was asking what happens if you change the cutting speed.

It's all to do with how the trajectory (motion) planner calculates movement, and combines that with other non-movement commands.

Trying exact stop mode (not always ideal for plasma cutting, where you really want speed to maintained as much as possible), or a basic G04 pause might be enough to alter exactly where the M5 command actually gets executed.

[Steve-m]

ooops double post sorry

[Steve-m]

That linked thread partially explains why I was asking what happens if you change the cutting speed.

It's all to do with how the trajectory (motion) planner calculates movement, and combines that with other non-movement commands.

Trying exact stop mode (not always ideal for plasma cutting, where you really want speed to maintained as much as possible), or a basic G04 pause might be enough to alter exactly where the M5 command actually gets executed.

Thanks I changes speed from 1000mm / min to 2000mm / min and "undercut" more than doubled to about 36mm may look into changing NVUM to maybe a KK01 I have and a UC100, seems nvum has issues

[dazp1976]

seems nvum has issues

Say no more.
Nothing new there.
The amount of cnc forums containing people that have grief with NVUM/NVEM is ridiculous.

[Steve-m]

Say no more.
Nothing new there.
The amount of cnc forums containing people that have grief with NVUM/NVEM is ridiculous.

cheers seems i should have done a bit more reserch, I have a nvem too that drove me nuts trying to get to talk to computer thought that was me

[dazp1976]

cheers seems i should have done a bit more reserch, I have a nvem too that drove me nuts trying to get to talk to computer thought that was me

Somebody needs to sort it. It's getting a bit out of hand.
Get them all off sale and burn the lot!!.

[Steve-m]

Somebody needs to sort it. It's getting a bit out of hand.
Get them all off sale and burn the lot!!.

recomend replacements? I have a KK01, thinking i should start building a nice shed PC, and put my shed software on it mmmmm with a nice touch screen mmmm

[dazp1976]

recomend replacements? I have a KK01, thinking i should start building a nice shed PC, and put my shed software on it mmmmm with a nice touch screen mmmm

The only all-in-one I can comfortably recommend is the AXBB-E, based on my experience with the UC300eth unit.

My veiw these days is: Spend the money on the important 'brains' then make savings elsewhere.

Using a controller that's iffy and has mixed reviews may leave you fighting and trying to fix the wrong problem costing you more in the long run.

There are also decent options from cncroom for the UC300eth and ESS but these cost:
https://cncroom.com/store/?currency=USD