New member with a new 8020 design

**Robin Hewitt** · 03-08-2010

Looks okay. Suggest you reduce all the overhangs as much as possible. The gantry arm could come down a bit. Replace the tension wires with single diagonals of angle iron, it will save you hours of setting up and it will stay set

Robin

**cncgreg** · 03-08-2010

Originally Posted by Robin Hewitt

Looks okay. Suggest you reduce all the overhangs as much as possible. The gantry arm could come down a bit. Replace the tension wires with single diagonals of angle iron, it will save you hours of setting up and it will stay set

Robin

I am sorry what looks like tension wires is really a 1" X 1/8" steel strap the single line on the drawing is really the center to center distance.