Not Just another Boxford tcl 125 thread....

[cooliced]

i2i, Is that on the manual button board on the front, if so, yeah thats not connected at all, just there for decor lol

Ive got 18k resistors on the Gecko drives now and it seems to be keeping the temp of the steppers now, might go to 32k for 3Amps, see how it goes.

im just about to try the 9v battery thing that was suggested for the spindle. fingers crossed

Stu

[i2i]

i2i, Is that on the manual button board on the front, if so, yeah thats not connected at all, just there for decor lol

ok, you'll need to energise each contactor for fwd or rev and the connections are on the side of the contactor. Normally the left conection is fwd and the right rev, and then you'll need to feed the gemini with an isolated 0-10v supply.

[battwell]

havnt read the thread end to end but there is a cheap gemini on ebay, finishing soon
http://cgi.ebay.co.uk/ws/eBayISAPI.d...:B:WNA:GB:1123