bearing/belts

[Jonathan]

Hmm, I guess making a seal or something is the least of my worries. This is what I'm thinking of using them for:



A pair on each side of the spindle should be pretty solid.
Which mounting type are they, DF/DT/DB?

http://www.skf.com/skf/productcatalo...e=3&startnum=3

[oadamo]

Hmm, I guess making a seal or something is the least of my worries. This is what I'm thinking of using them for:



A pair on each side of the spindle should be pretty solid.
Which mounting type are they, DF/DT/DB?

http://www.skf.com/skf/productcatalo...e=3&startnum=3

see what you mean with that pic.
on the bearing its got (skf 7205 bep austria s)
adam

[oadamo]

http://www.skf.com/skf/productcatalo...e=3&startnum=2
found this.
adam

[Jonathan]

http://www.skf.com/skf/productcatalo...e=3&startnum=2
found this.
adam

Thanks for that. Looks like they might not be the best bearings for this application, still thinking.

Did you find any pulleys?

[oadamo]

Thanks for that. Looks like they might not be the best bearings for this application, still thinking.

Did you find any pulleys?

hi mate no i havent had chance yet iam to busy with work, but iam going to have a go at sorting everything today bacause i have a day off :)