Looking at getting some small parts machined using Brass.

**luke11cnc** · 26-10-2011

you are brave Jazz

I get the feeling this is just going to be a one or two off

good lucky

James and Luke

**JAZZCNC** · 26-10-2011

Originally Posted by luke11cnc

you are brave Jazz

I get the feeling this is just going to be a one or two off

good lucky

James and Luke

Has DEL-BOY says James. . . "He who dares wins". .:dance:

**blackburn mark** · 26-10-2011

Has DEL-BOY says James. . . "He who dares wins". .:dance:

this time next year we'll be millionairs

**JAZZCNC** · 26-10-2011

Originally Posted by blackburn mark

this time next year we'll be millionairs

Ah ah only if we win the lottery. .:rofl:

**ryanlownie** · 26-10-2011

Jazz, I can send you the .ipt's to take a look at. PM me a contact email and I'll send them straight away. As mentioned in first post I simply need a prototype of each part to check fitment and from there it'll be onto quantities of 10-15pcs minimum, that number could easily be higher but all depends on the interest I receive from potential buyers of the parts.