3 * RM1610 ballscrews, 780mm & 660mm

[Jonathan]

Much as I'd love a higher bid, if Jazz cancelled his order and I sold the screws to 2e0poz, then that would have been a bit harsh on Jazz so I thought I'd wait.

FK/FF blocks are the easiest to make as all the accurate bits are on the lathe. How much do you pay for them, lets see if I can't do them cheaper :naughty:

[JAZZCNC]

How much do you pay for them, lets see if I can't do them cheaper :naughty:

Go for it.!!. . . Just payed 60 dollars for 4 so thats £38 or £9.50 each. Plus a bit of shipping but thats mixed in with everything else I've ordered.

[Jonathan]

Ballscrews are still for sale.

Jonathan out of interest why are you not using these on your milling machine? You said you were going to upgrade it at some point?

Same reason that John S hasn't bought them - 10mm pitch is suboptimal for the milling machine or lathe.
They were going to be used on a machine I'll soon be making, but due to design changes they're no longer suitable so I'll be buying longer ones.

Go for it.!!. . . Just payed 60 dollars for 4 so thats £38 or £9.50 each. Plus a bit of shipping but thats mixed in with everything else I've ordered.

How much does the shipping work out at if you calculate it proportionately by price? Assuming that's £9.50+shipping per pair of supports then it's not going to save much. I'll still make my own as it's so much less restrictive and guaranteed not to have dodgy bearings or the wrong fit on the bearings.