Need help

[Jonathan]

I'd be happy to come and help but I'm currently 100 miles away!

Is there anything specific you need help with, if so lots of people here (myself included) can answer your questions. I've used V-carve and mach 3 a lot, so if it's help with the software then using a remote desktop connection plus phone could work well?

[gilly1024]

I'd be happy to come and help but I'm currently 100 miles away!

Is there anything specific you need help with, if so lots of people here (myself included) can answer your questions. I've used V-carve and mach 3 a lot, so if it's help with the software then using a remote desktop connection plus phone could work well?

Hi Jonathan

Thanks for getting back to me.

Currently we,re using our machine in our garage and the computer that's running it is unable to connect to the Internet, tried to use a usb wireless receiver but i,m to far from the router to to hold any decent connection.Ideally I would like to stand over someone's shoulder and watch and copy so to speak (monkey see, monkey do) preferably.

Like I mentioned before I'm quite negotiable over paying for the training.

Thanks again for the reply