Nice AM882 drivers,

Trust me you will really notice a difference from the ones that you had been using. As far as wiring goes I have got it done to the point of the machine working and starting to earn it's keep. I still need to get a few parts of my own and get them fitted and done. Also need to get the relays I bought in place so that all the other work is safe guarded and reduce risk of things going wrong.

Just put your shoulder to it and get it done. No it is not fun and can be a pain in the back side but the end result will be worth it in productivity increase and increase in quality control. Then comes the fun of g-code, which so many think is just turn on the CAM program and plug in the code and I can tell you that is rarely the case unless you have done a huge amount of set up to the CAM program. Some CAM does not let you do that level of set up so you have to go in and edit the code to get a really nice finish.

Michael