Strike CNC (My first CNC router)

[John S]

Regulations in the UK on estops state they must be 48 volts max,

[Shinobiwan]

Regulations in the UK on estops state they must be 48 volts max,

After my rewire its now 24v and wired to a relay which cuts 230v to the drivers and in turn to the estop input for BOB/Mach. But yes Strike had put it inline with the 230v supply to cut power.

[JAZZCNC]

Regulations in the UK on estops state they must be 48 volts max,

Ah ah John the only Regs this shower know about is Reg fries from Mcdonalds. .