Strike CNC (My first CNC router)

[jimg100]

Almost exactly the same all the wires going into those green plugs had been stripped to far and so there was approximately 6mm of bare copper with odd strands that were not clamped and so a possible short and several wire were not clamped tightly enough and I pulled them out easily.
Is it ok to put my phone number on here as I would rather talk on the phone?

[Shinobiwan]

Is it ok to put my phone number on here as I would rather talk on the phone?

You can PM me your number as I wouldn't recommend posting a phone number on a public forum.

Or I can give you mine if that's easier.